S&w Fire Sight Fiber Optic Sight Sets Williams Gun Sight

Product Description

Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.

Product Description

Really "shines" when other sights are useless. No switch to turn on, no batteries to wear out. Both front and rear blades have their own green tritium gas light source and provide a green/green , 3-dot sight picture. Some models also available in green/yellow and green/orange. The front sight is always green for contrast with the rear sight. Unaffected by weather, gun solvents or oils. Used by NATO, U.S., and Israeli armies. Also ideal for law enforcement and others requiring accuracy in low-light conditions. Contains both front and rear sights. Rear sights either replace the original rear entirely or, as on S&W revolvers, a new rear leaf, screw and nut are provided. Front sights either replace the original (1911 Auto); slip over and are pinned to the original blade (most other autos); or replace the factory colored insert (S&W Autos). Factory warranty on TRU-DOT sights to the original purchaser for 12 years.

Product Description

No-Snag, Low-Profile With Tritium Dots For Enhanced Visibility In Low Light

The ultimate marriage of quality and function, Trijicon® self-illuminating tritium inserts provide a fast, easy-to-acquire sight picture in all light conditions. Wedge shaped body has fully rounded edges and sets low in the slide for minimum profile and a smooth, snag-free draw for concealed carry and competition guns. Fine line serrations on rear of blades eliminate glare for the best possible sight picture. Dovetails are cut .002"-.003" oversized to fit existing sight cuts; gunsmith fitting may be required. Straight Eight -One tritium dot on the front sight and one on the rear align vertically for exceptionally fast acquisition.Ultra Low Mount provides an even more compact profile; fits pistols with Novak-type .500"x 65" dovetail in slide. "T" suffix on model number indicates rear sight is  .050" taller to provide correct sight picture on smaller short-slide pistols.Ultra Low Mount Ledge- Front edge of the rear sight blade has been cut square to provide adequate purchase for one-handed racking of the slide. Available in standard and T models, with one centered Trijicon insert for "Straight Eight" sight picture or with two side-by-side inserts for a more traditional, three-dot horizontal sight picture.

SPECS: Steel, matte blue finish. Straight Eight - Rear notch is .125" wide. 1911 Auto fits .375” x 65º rear dovetail and .300” x 60º front dovetail. May require milling of slide to install. Instructions included. Kimber and S&W fit factory dovetails. May require minor fitting. Ultra Low Mount, including Ledge, fits Novak-type .500” x 65° dovetail. “T” suffix on model number indicates .050” taller height for short-slide compact pistols. May require minor fitting. 357R may be used with factory front sight.

Product Description

The 10-8 Performance Glock Night Sight Set combines the heat treated 4140, CNC machined, .140” rear sight along with a green tritium, .215” insert front sight. Both front and rear have 40LPI (Lines per Inch) serrations to provide crisp visual focus and glare reduction, and have a Melonite finish. The sight body is contoured and dehorned for comfortable handling and carry.

SPECS: Front sight .215” high, .115” wide, Rear U-Notch width .140”

Product Description

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of manufacture.

Product Description

Product Description

Nearly One-Third Brighter Than Standard Night Sights!

Night Fision’s Perfect Dot sights for Canik TP9-series pistols feature design upgrades that make them brighter, more vivid, and more durable than traditional night sights. Like all night sights, Perfect Dots use self-illuminating Tritium to get the "always on" glow that makes them so effective. The difference is PDs have 30% MORE Tritium in them, so they are unusually bright. And the bold front sight draws the eye, encouraging fast, instinctive "Front Sight Focus" to keep your eyes on the target.

The Tritium insert isn’t surrounded by a painted-on ring, but rather one made of a daylight fluorescing material that produces optimum visibility in daylight. The result is what the Night Fision folks call the "Perfect Dot". Provides maximum visibility in both nighttime AND daylight conditions, so when the pressure is on, you’ll locate your Canik TP9’s sights quickly - and get them on target fast.

• Robust machined 4140 steel sight bodies - far stronger than the factory plastic
• Matte black Nitride finish - excellent wear- and corrosion-resistance
• Tritium vial has extra protection from knocks & dings
• Variety of front dot colors & rear notch configurations to choose from (see below)
• Sold as front/rear pairs only

We are offering Perfect Dot sights to fit TP9SFL / TP9SFX pistols in the factory heights. A separate model fits TP9SA / TP9SF / TP9SF Elite Canik pistols.

Options include a choice of Square or U-shaped rear notch in plain Black (no inserts) or with Tritium dots (Clear) on either side of notch. Front dot options include a choice of Orange or Yellow outline around the Tritium dot. Read the listings below carefully before ordering.

With so many options available, you can fit your Canik TP9 with a "Perfect Dot" night sight configuration that’s... perfect for you.
 

Product Description

To meet the shooters’ increasing demand for high quality sights LPA has developed
the spr series. The SPR sight sets are machined from solid steel using state-of-the-art CNC
milling. Improve your firearm with a spr sight set!
Features:
• Streamlined design and compact low profile.
• Micrometric adjustment for windage and elevation provided by hardened click screws.
• Tapered dovetail for a strong locking in the existing groove.
• Allen wrench and adjustment screwdriver included in the package.

Product Description

Matched sight set features green tritium on both the front and rear sights for fast pickup under any light conditions. Rear sight features vertical tritium bar with a highly visible, white border; front includes tritium dot surrounded by a white ring. Rounded, low profile design won’t slow your draw. Designed to directly replace factory sights. Standard Dot (STD) front sight has narrow, white ring around the tritium dot for precise aiming at longer distances.

Product Description

Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.

Product Description

Used by numerous IDPA and USPSA National champions, as well as law enforcement professionals, these streamlined, steel sights are built for fast target acquisition. A variety of front and rear sight configurations, including fiber optics, self-illuminating Tritium inserts, and plain black, let you mix and match for carry, competition or tactical operations. Designed to fit factory dovetails with little to no fitting required. Tactical rear sight features a unique Wave Profile contour with concave corners for an extra wide field-of-view and smooth, no-snag removal from the holster. U-shaped notch has gently radiused corners to help direct the eye quickly to the front sight acquisition.

Product Description

SPS & SPF series "carry sight" for Kimber semi automatic pistols with fixed sights. Produced with MIM technology and CNC milling. Fits the existing dovetail slot without milling. Compact low profile. Micrometric adjustment for windage and elevation provided by hardened click screws Allen wrench and adjustment screwdriver included. Works on all Kimber models with the Kimber fixed sight cut.

Product Description

Low Mount With Tritium Dots

Fixed combat sights with Trijicon® self-illuminating Tritium inserts provide a fast, easy-to-acquire sight picture in all light conditions. The Tritium dot on the front sight aligns vertically with the single dot on the rear sight in a distinctive elongated figure eight pattern. Wedge-shaped body has fully rounded edges and sets low in the slide for minimum profile. Offers an exceptionally smooth, snag-free draw for concealed carry and competition guns. Fine-line serrations on front and rear blade eliminate glare for the best possible sight picture. Fits factory dovetail cuts; minor fitting may be required. Supplied as a front/rear sight set. Standard SlantPro rear sight has a rear face that slants slightly forward and a gently curved front face. Ledge™ rear sight has a vertical, square-cut front face that provides extra purchase for one-handed slide racking. Straight Eight - Tritium dot on the front sight aligns vertically with the single Tritium dot on the rear sight in a distinctive, elongated “figure eight pattern.” Sight sets are Straight Eight configuration unless indicated otherwise in the table. 3D – Tritium dot on the front sight aligns horizontally with two dots on each side of the rear sight notch for an easy-to-see three dot sight picture. Supplied as a front/rear sight set.

SPECS: Steel, matte blue finish. Tritium inserts - Green. Rear Sight: .125" (3.1mm) x .112" (2.8mm) notch. Other dimensions vary depending on model. Front sight heights vary to regulate properly with rear sight. Browning HP requires milling of slide.

Product Description

White Dot adjustable sight set for the Smith & Wesson M&P.

Product Description

Used by numerous IDPA and USPSA National champions, as well as law enforcement professionals, these streamlined, steel sights are built for fast target acquisition. A variety of front and rear sight configurations, including fiber optics, self-illuminating Tritium inserts, and plain black, let you mix and match for carry, competition or tactical operations. Designed to fit factory dovetails with little to no fitting required. Tactical rear sight features a unique Wave Profile contour with concave corners for an extra wide field-of-view and smooth, no-snag removal from the holster. U-shaped notch has gently radiused corners to help direct the eye quickly to the front sight acquisition.

Product Description

Trijicon has introduced the addition of new sights to our line of taller Bright & Tough™ Suppressor Night Sights designed specifically for handguns fitted with suppressors and to serve as backup iron sights for the growing number of shooters utilizing the Trijicon RMR® with machined slides. Multiple front / rear configurations are available for a variety of applications. The Trijicon Suppressor Sights offer tritium illumination for up to 12 years (on green and yellow lamps) and 5 years (on orange lamps).

INCREASED HEIGHT TO ACCOMMODATE MULTIPLE SHOOTING APPLICATIONS

Specifically engineered to be as robust as possible while still allowing use with a suppressor or as back up iron sights for a slidemounted red dot sight, such as the Trijicon RMR.

INSTANTLY VISIBLE SIGHT PICTURE IN NO LIGHT AND LOW LIGHT SITUATIONS

Tritium phosphor-filled glass lamp provides battery free glow allowing for an visible sight picture in all lighting situations.

INCREASED DAYLIGHT DOT VISIBILITY

White painted rings around tritium lamps enhance users ability to see sight picture in bright light shooting situations.

ENHANCED PROTECTION FROM HEAVY RECOIL AND HARSH CLEANING SOLVENTS

Tritium gas lamps are contained within protective aluminum cylinders and have additional silicone rubber cushioning.

EVENLY DISTRIBUTED LIGHT FROM TRITIUM LAMPS

Each Trijicon tritium lamp is capped with a sapphire jewel that help evenly distribute the light from the lamp and also acts as an additional layer of protection from puncture and cleaning solvents.

Product Description

Suppressor Height high-visibility sight combinations put you on target faster in high stress or low light conditions by pulling your eyes to the front sight. Sight set includes non-tritium, white line V-notch for the rear sight, green tritium dot surrounded by a white ring for the front. Low profile, no-snag design is great for carry and combat competition guns. Matched sight sets offer direct replacement of factory sights. The Standard Dot front sight has an easy-to-see white ring surrounding the tritium dot. Airlite Ti replaces pinned front sight on fixed sight guns, requires drilling for pin.

Product Description

• Battery free technology means the sight is visible in any lighting conditions
• Assembled in USA
• Front sight Focus Lock ring makes sight acquisition even faster

This Tritium night sight is compatible with slides that have Low Mount sights.

Product Description

The TFX Pro Night Sights are constructed with duty or military use in mind.  These sights feature both a Tritium vial for constant illumination, as well as fiber optic rods that amplify ambient light.  Not only do these sights have both Tritum vials and fiber optics, but they are hermetically sealed in a redesigned TFX capsule, that provides superior protection against oils, chemicals and cleaning solvents.  No more worrying about damaging your sights when cleaning!  Front Sight features an orange outline, providing a contrast in colors and faster target acquisition.  Rear sights features a U-notch design and angled front face for emergency slide racking.  Sight bodies are CNC machined steel and have a Truglo “fortress” finish.

TFX Pro Sights sets are Made in the USA, using Swiss Tritium.

Product Description

Designed to be Snag Free and Always Visible

Swiss tritium gives the tritium night sight maximum brightness. Without a need for batteries, shooters are never left without a usable sight. Aiding visibility even further is the front sight Focus Lock ring. Reliable and durable, the snag-free design fits standard holsters.

Tritium night sights are coated with the Fortress Finish for permanent protection.

• Angled read sight for emergency one-hand operation
• Quick and accurate U-notch design
• Assembled in the USA

This tritium night sight is compatible with Glock handguns.

Product Description

Streamlined, all-steel sights fit low on the slide to resist snags that can impede the draw. Provide fast front sight recognition and enhanced field-of-view for quick target acquisition under stress—excellent for concealed carry or tactical competition. Rear sights are drift-adjustable for windage, with a locking setscrew to stay put. Some fitting may be required to install all these sights. Front Sight is available with a black, serrated rear face for reduced glare. Sevigny Competition rear sight fits the popular Novak slide cut and features a square notch, rear face angled slightly back to eliminate glare, and nominal 1⁄8" radiused corners to help prevent hang-ups during the draw. Plain black finish without distracting points, edges, or serrations provides excellent contrast in bright daylight. Available in set with fiber optic front sight. Square notch.

Product Description

The TFX Pro Night Sights are constructed with duty or military use in mind.  These sights feature both a Tritium vial for constant illumination, as well as fiber optic rods that amplify ambient light.  Not only do these sights have both Tritum vials and fiber optics, but they are hermetically sealed in a redesigned TFX capsule, that provides superior protection against oils, chemicals and cleaning solvents.  No more worrying about damaging your sights when cleaning!  Front Sight features an orange outline, providing a contrast in colors and faster target acquisition.  Rear sights features a U-notch design and angled front face for emergency slide racking.  Sight bodies are CNC machined steel and have a Truglo “fortress” finish.

TFX Pro Sights sets are Made in the USA, using Swiss Tritium.

Product Description

White line, V-notch rear sight and a white dot front post pull your eye to the front sight in high stress or low light conditions. Presents a very fast, highly visible sight picture to get you on target quickly. Low profile, no-snag design (even the top of the front sight body is rounded) is great for carry and combat competition guns. Matched front and rear sets offer direct replacement of factory sights. Big Dot provides improved speed when engaging targets at close range. Standard Dot gives better long range accuracy.

Product Description

Strong, Easy-To-Acquire & 30% Brighter Than Standard Night Sights

Night Fision’s Perfect Dot night sights for Springfield XD-series pistols employ a revolutionary new design that produces brighter, more vivid, more durable aiming dots. Like all night sights, Perfect Dots use self-illuminating Tritium to get the "always on" glow with a difference: PDs have 30% more Tritium, so they are brighter than other night sights. The Tritium insert isn’t surrounded by a painted-on ring, but rather one made of a daylight fluorescing material that produces optimum visibility in daylight. The result is what the Night Fision folks have dubbed the "Perfect Dot".

The Perfect Dot provides maximum visibility in both nighttime AND daylight conditions, so when the pressure is on, you’ll locate your Springfield XD’s sights more quickly and get them on target fast. The bright front sight contrasts well with the rear sight, encouraging fast, instinctive "Front Sight Focus" to keep your eyes on the target  

• Rugged machined 4140 STEEL housings (not plastic!)
• Matte black Nitride finish - excellent wear- and corrosion-resistance
• Tritium vial has extra protection from knocks & dings
• Variety of front dot colors & rear notch configurations to choose from (see below)
• Sold as front/rear pairs only

Night Fision’s Perfect Dot night sights for Springfield XD pistols come in two models: One model fits XD ®, XD(M) ®, and XD ® Mod 2™ pistols. The other fits the XD-S™ and XD-E™.

Options include a choice of Square or U-shaped rear notch on the plain black rear sight, with a choice of Orange or Yellow outline around the Tritium front dot. "Clear" rear sight has a Tritium insert on each side of the rear notch; the absence of fluorescing surrounds ensures your eyes are still drawn to the front sight first.

With so many options available, you can fit your Smith with a night sight configuration that’s perfect for you - just another reason why they’re called "Perfect Dot" sights!